Amps
[Top] [All Lists]

[AMPS] wanted SB 220 bandswitch

To: <amps@contesting.com>
Subject: [AMPS] wanted SB 220 bandswitch
From: 2@vc.net (measures)
Date: Fri, 22 Sep 2000 01:44:09 -0700
>
>If a spare is floating around, please contact me, I need one.
>
>Cheers,
>Ian ZS6BTE
>
Km1H, Carl Heuther is a source of SB-220 bandswitches.  His e-mail adr is 
km1h@juno.com.  If the contacts on your orig. bandswitch vapourized, it 
might be a good idea to decrease VHF gain before you *fire* the amp. up 
with a new bandswitch.  //  Save the old bandswitch as a source of fixed 
contacts.  Drill the rivets.  Use #0-80 brass hardware to fasten the 
replaced contact.  Silver-solder after the nut is snug.  
>--
cheers
>


-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>