Amps
[Top] [All Lists]

[AMPS] AL-80B Amps

To: <amps@contesting.com>
Subject: [AMPS] AL-80B Amps
From: ve3tu@rac.ca (Steve)
Date: Wed, 27 Sep 2000 06:52:27 -0400
It just boggles my mind the kind of comments we see popping up on the
this reflector. I hope you have an elmer at the radio club and I hope
your elmer has read the ARRL handbook. I think that reading and
understanding the handbook should be mandatory to obtain an amateur
license. The handbook is not perfect but it gives you a good start down
the road.

73 es gl with your other discoveries and revelations Steve

Tarrant David wrote:

> This subject has probably be covered before but I thought
> that I would again share this with the group.
>
> The Radio Club here at Diego Garcia has two AL-80B
> Ameritron amps.  A month ago we had a 3-500Z short and
> it had to be replaced.  Last night the other amp's 3-500Z
> shorted and we also had to replace that one.  While checking the
> schematic during this process, we noticed that the
> OPR/STANDBY switch only enables the keying relay.
> The High Voltage comes on and remains on with the
> OFF/ON switch.  We were all a bit shocked by this design
> and wanted to warn others before they are fatally shocked
> by this design!
>
> 73,
>
> Joe  K5DIY/VQ9JT
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>