[AMPS] G2DAF Circuit

[Ian White, G3SEK" <g3sek@ifwtech.com (Ian White, G3SEK)]

Tom Rauch wrote:
>
>The saving grace of the DAF circuit is the heavy negative RF 
>feedback (from cathode drive) helps correct for the "half-fast" 
>manner the circuit developes screen voltage.
>
The real G2DAF circuit is not cathode driven - it's grounded cathode,
passive grid. (Was the "G2DAF" design that you built and tested?)

The one-and-only *real* G2DAF design is the one in his original
articles, reproduced on my web site.

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.com/g3sek

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com