Amps
[Top] [All Lists]

[AMPS] Plate Choke

To: <amps@contesting.com>
Subject: [AMPS] Plate Choke
From: 2@vc.net (measures)
Date: Fri, 27 Oct 2000 22:23:57 -0700
>
>I am in need of some help on winding a Plate Choke for 4- 811A's to cover
>10-160 plus WARC. The form I have has 41/2" of winding space at 3/4"
>diameter. Is there a decent design out there that will fit my needs ?? I
>have looked at 2 designs that had 1/4" spacing between turns every so often.
>I assume this is the current thinking on winding a plate choke. Thanks
>Ed W3NR
>
 spacing between sections makes very little difference in self 
resonances.  I would use #28 high temp motor rewinding wire.  Apply coat 
of varnish to secure winding.  Let dry.  Remove turns as needed to safely 
park resonances.  


-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>