Amps
[Top] [All Lists]

[AMPS] Advice On Homebrewing Chassis Please

To: <amps@contesting.com>
Subject: [AMPS] Advice On Homebrewing Chassis Please
From: 2@vc.net (measures)
Date: Wed, 27 Dec 2000 00:02:31 -0800
>
>Radio WC6W <wc6w@juno.com>
>>  Pop (or regular) rivets or even screws, with nuts or pem-nuts, will be
>>easier in the short run.
>
>Pem-nuts are neat but I'm inexperienced in metalwork and don't know where
>to get them and whether I'd need a special tool to install them.  Can
>someone please advise?
>
I install PEM nuts by drilling the specified size hole, inserting the 
nut, and squeezing with a large vise.  The mfg's name is Pennsylvania 
Engineering and Manufacturing.  There has gotta be a Web site.  My local 
distributor is Dudek Co. in Oxnard, CA.  They have a $20 minimum.  I buy 
1/8" 6061-t6, cut-to-order plate from Inductrial Metals in Burbank.  
>
cheers, Chuck.

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>