Amps
[Top] [All Lists]

[AMPS] Zener screen supplies

To: <amps@contesting.com>
Subject: [AMPS] Zener screen supplies
From: Ian White, G3SEK" <g3sek@ifwtech.com (Ian White, G3SEK)
Date: Mon, 16 Apr 2001 15:12:45 +0100
measures wrote:
>
>>
>>Message text written by INTERNET:conrad.farlow@virgin.net
>>
>>>How did the insects get inside the tubes?<
>>
>>This must be the troll of all time. Small 4CX tetrodes have EXTERNAL anodes
>>and also EXTERNAL screen rings, separated by a few millimetres of ceramic
>>insulator. 
>
>â?¬  The Eimac outline drawing for the 4cx250B shows a much longer leakage 
>path.  
>
>>In this family of tubes, flashovers commonly occur EXTERNALLY. 
>>
>â?¬  I have never experienced an external arc,  John.  "A few mm" appears 
>to be off by a factor of c. 9.  

Enough of these non-standard units! The last time I used the arc method
to measure the length of the gap on a 4CX250, it was 1.0 earwig. 

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.com/g3sek

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>