Amps
[Top] [All Lists]

[AMPS] Zener screen supplies

To: <amps@contesting.com>
Subject: [AMPS] Zener screen supplies
From: John_Nelson@compuserve.com (John Nelson)
Date: Mon, 16 Apr 2001 17:01:58 -0400
Message text written by measures

>Two needed dimensions are left out. I would reach for my machinist's
scale. <

Indeed. But you originally stated:

>By subtracting, the length of the anode insulator may be arrived at. <

which is incorrect. 

The external anode-screen insulator in a small 4CX has a path length of
about 7mm. Flashovers can and do occur across it. I have seen several
4CX250Bs removed from distributed-amplifier service where tracking marks
have been clearly visible across the anode-screen insulator, suggesting
that the flashover has been external. I do not know whether that is the
predominant mode of anode-screen flashover in these valves. However, as far
as power-supply protection is concerned, it makes no difference whether the
flashover is internal or external. Both appear to be possible. 

73 John
GW4FRX

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>