On Sun, 19 Aug 2001 14:08:08 -0400, Tom Rauch wrote:
>It is not necessarily at tube problem, especially if you can drive the
>PA to normal output when it is acting acting up.
_________________________________________________________
Yes, the PA output and plate current are all normal, even when the
problem is most apparent. I will have to look further, it seems.
Thanks to all who replied. Most had advice similar to Toms: Not likely
the tubes.
Whew! Saved some bucks (I hope).
Tnx again,
73, Bill W7TI
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|