Amps
[Top] [All Lists]

[AMPS] Hand in pocket test

To: <amps@contesting.com>
Subject: [AMPS] Hand in pocket test
From: k7fm@teleport.com (Lamb)
Date: Fri, 12 Oct 2001 22:51:44 -0700
With the warnings about hands in the power supply, let me tell you a story
about my younger days (age 15, 40 years ago)

I was measuring the length of a zip cord to wire to a switch which was
surface mounted on a desk for my novice station.  I plugged it in to get the
proper length but  then forgot that it was plugged in.  It was the right
length, so I looked around for my wire strippers but could not find them.
So, I split the wire and stuck the wire in my mouth and removed the
insulation with my teeth (both sides).  No problem.  I then began to wire to
the switch, but figured out a more sanitary way to run the wire - which
required a shorter length of zip cord.  So I picked up the wire cutters and
cut the zip cord.  Suddenly, a spark, a portion of my wire cutter was blown
off and the circuit breaker on the main panel was tripped.

It was then that I realized I had been very lucky.

As a result of this experience (and being knocked across the room when I
grabbed the high voltage of my open power supply at age 16, knocking the
closet doors off the track), I have been more careful.  I figured I used up
most of my luck.  My last 40 years have been uneventful.

Moral - even keeping both hands out of your high voltage supply may not
protect you if you do something really stupid - unless you are really lucky.

Colin  K7FM


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>