FW: [AMPS] Bypassing Screen of 4cx800a for 50 MHz

Amps

FW: [AMPS] Bypassing Screen of 4cx800a for 50 MHz

To:	<amps@contesting.com>
Subject:	FW: [AMPS] Bypassing Screen of 4cx800a for 50 MHz
From:	Peter.Chadwick@zarlink.com (Peter Chadwick)
Date:	Fri, 21 Dec 2001 07:26:51 -0000

Rich said:

> It is my opinion that the heater should always be connected 
>to the cathode and the heater should float -- unless one has a 
>freebee supply of new tubes.

I agree with that sentiment - even if you have a supply of free tubes!

73

Peter G3RZP



--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] Bypassing Screen of 4cx800a for 50 MHz, (continued) [AMPS] Bypassing Screen of 4cx800a for 50 MHz, Michael J. Tubby B.Sc. (Hons) G8TIC [AMPS] Grounding Screen of 4CX-1000, Lamb [AMPS] Bypassing Screen of 4cx800a for 50 MHz, 2 [AMPS] Bypassing Screen of 4cx800a for 50 MHz, Steve Thompson [AMPS] Bypassing Screen of 4cx800a for 50 MHz, Michael J. Tubby B.Sc. (Hons) G8TIC [AMPS] Bypassing Screen of 4cx800a for 50 MHz, 2 FW: [AMPS] Bypassing Screen of 4cx800a for 50 MHz, Peter Chadwick FW: [AMPS] Bypassing Screen of 4cx800a for 50 MHz, 2 FW: [AMPS] Bypassing Screen of 4cx800a for 50 MHz, <g3sek@ifwtech.com (Ian White, G3SEK) FW: [AMPS] Bypassing Screen of 4cx800a for 50 MHz, 2 FW: [AMPS] Bypassing Screen of 4cx800a for 50 MHz, Peter Chadwick <=

Previous by Date:	[AMPS] HV Pole Pigs ++, Will
Next by Date:	[AMPS] 1.8kHz filters, Peter Chadwick
Previous by Thread:	FW: [AMPS] Bypassing Screen of 4cx800a for 50 MHz, 2
Next by Thread:	[AMPS] Transformer Current ratings, Bill Smith
Indexes:	[Date] [Thread] [Top] [All Lists]