Amps
[Top] [All Lists]

[AMPS] Shunt regulated high voltage psu

To: <amps@contesting.com>
Subject: [AMPS] Shunt regulated high voltage psu
From: W8JI@akorn.net (Tom Rauch)
Date: Tue, 29 Jan 2002 06:13:48 -0500
> However, it does show that the more you think about screen supplies,
> the more potential failure modes you see, and the more complex the
> design becomes to defend against them. Marv's is complex; Acom's is
> complex; Alpha's is complex; and G4JZQ's and mine is complex. We all
> did it differently, but we all agree that a handful of cheap zeners
> won't cut it.

A handful of cheap zeners will cut it, if you power them from a 
separate dropping resistor and keep the current through them 
reasonably constant.

What I have done is power very low wattage zeners from the main 
HV through a large dropping resistor, and use that as a reference 
for a high gain transistor amplifier that does the regulating.




73, Tom W8JI
W8JI@contesting.com 

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>