[Top] [All Lists]

[Amps] al80a

To: <>
Subject: [Amps] al80a
From: (Steve Katz)
Date: Thu, 1 Aug 2002 07:03:33 -0700

>  One more comment here, Please??  I turned the amp on and noted that the
> plate(anode to the new generation) turned a little red, indicating that
> the
> plate (anode) is drawing current !! ( maybe too much??)
>  Carl / kz5ca
        //When you power "on" the amp but it remains in standby (unkeyed),
it shouldn't draw any plate current and the anode should be dark gray.  If
it's drawing current, either it's keyed or its cutoff bias isn't there.
What happens if you flip the switch to STBY?  -WB2WIK/6 

> _______________________________________________
> Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>