Amps
[Top] [All Lists]

Re: [Amps] pink ceramics

To: amps@contesting.com
Subject: Re: [Amps] pink ceramics
From: "Ian White, G3SEK" <G3SEK@ifwtech.co.uk>
Reply-to: "Ian White, G3SEK" <g3sek@ifwtech.co.uk>
Date: Thu, 21 Aug 2003 08:35:51 +0100
List-post: <mailto:amps@contesting.com>
John T. M. Lyles wrote:
Pink ceramic was high in magnesium content I believe.

From http://www.svetlana.com/docs/tubeFAQ.html


Q. Why is your ceramic pink?
A. Svetlana ceramic power tubes are manufactured with high-purity, high-alumina ceramic with chromium and manganese additives. The combination of chromium and manganese with high alumina ceramic results in a true chemical bond in the metal-to-ceramic brazing process. These additives also give Svetlana ceramic tubes their distinctive appearance. The stronger bond allows a higher processing temperature than typically used by manufacturers in the West. A high-temperature bake-out process drives gasses from the internal electrodes during vacuum processing. Clean high-temperature processing means long operating life



It came from the Frenchtown ceramic factory, and was used by RCA for many years on their expensive Cermelox tetrodes and other big tubes (up to $100K in value). Purple/pink hue came in some Russian tubes from their own similar source. The US source has dried up, and now alumina ceramics come from others like Coors

Peter and I both knew that stuff wasn't fit to drink.



-- 73 from Ian G3SEK 'In Practice' columnist for RadCom (RSGB) Editor, 'The VHF/UHF DX Book' http://www.ifwtech.co.uk/g3sek _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Amps] pink ceramics, Ian White, G3SEK <=