Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] amplifier resource page

from [Rick Bullon] [Permanent Link][Original]
To: amps@contesting.com
Subject: [Amps] amplifier resource page
From: "Rick Bullon" <kc5ajx@hotmail.com>
Date: Sun, 19 Sep 2004 20:49:26 +0000
List-post: <mailto:amps@contesting.com>
Some of you might already know of this site but it looks like it has a lot of info on amps.

http://www.geocities.com/ko4nrbs/

It will take a while to check out all the info. I thought I would pass it along to the group
73
Rick
kc5ajx


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] amplifier resource page, Rick Bullon <=
Previous by Date:  Re: [Amps] GLA-1000 Boards, Carlos Avellanet [KF4RRN]
Next by Date:  Re: [Amps] Equalising resistors with HV diodes, Radio WC6W
Previous by Thread:  [Amps] Collins 30L-1 / 572's B, Javier Remoto
Next by Thread:  [Amps] On Thu, 16 Sep 2004 21:54:56 -0700, Leigh S. Jones wrote:>rule 1: never apply plate voltage to the tube nor apply drive power>until after the prescribed filament warm-up period has elapsed_________________kill the B- lead for the HV, Angel Vilaseca
Indexes:  [Date] [Thread] [Top] [All Lists]