Amps
[Top] [All Lists]

Re: [Amps] Power metering in linears

To: thomas.hoeppe@asamnet.de, amps@contesting.com
Subject: Re: [Amps] Power metering in linears
From: Radio WC6W <wc6w@juno.com>
Date: Thu, 7 Oct 2004 18:01:32 -0700
List-post: <mailto:amps@contesting.com>
On Wed, 6 Oct 2004 20:38:59 +0200 "Thomas Hoeppe"
<thomas.hoeppe@asamnet.de> writes:
> Hello technicians,
> 
> I was adding a power meter to a new homemade linear. 

<snip>

> The problem: The output voltage for a given power is the same from 
> 40-10m, but nearly null on 80m and different on 160m.
> 
> Then I tried the design from the linears in the W6SAI handbook. They 
> use Amidon 50-6 toroids. The output voltage ón 160 is about 1/2 of 
> the voltage on 10m. 
> 
> 
> Thanks!
> 
> Tom, DJ5RE

Hi Tom,
   A better circuit configuration is the cross-coupled transformer
directional coupler.

   It eliminates all the capacitors and their adjustments.

   I don't know if anyone has described it in the Amateur literature but,
a good explanation may be found in "Single Sideband Systems & Circuits"
by Sabin & Schonike, 1987, pp. 498-99.

   Incidently, to cover as low as 160 you would want to employ a low mu
ferrite rather than a powdered iron core.   FT-50A-61's should suffice.

73 & Good evening,
   Marv  WC6W






*

________________________________________________________________
Speed up your surfing with Juno SpeedBand.
Now includes pop-up blocker!
Only $14.95/ month - visit http://www.juno.com/surf to sign up today!
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>