Amps
[Top] [All Lists]

Re: [Amps] Aplha 91b

To: "Fortra" <fortra@siol.net>
Subject: Re: [Amps] Aplha 91b
From: R.Measures <r@somis.org>
Date: Mon, 10 Jan 2005 07:37:07 -0800
List-post: <mailto:amps@contesting.com>

On Jan 10, 2005, at 1:46 AM, Fortra wrote:


Hi Rich,

the Alpha 91b being produced in Bulgaria used GU74B or 4cx800.


Good point, Nermin. The last I heard, the 91B used 2, 4cx800As. If the 4cx800 uses a gold-plated grid, the problem could be gold migration to the oxide cathode. If the grid is not gold-plated, perhaps the cathode is getting tired,
- If anyone has a kaput 4cx800 that they would like to donate, I would like to autopsy it to find out out what happened and post JPGs of the guts on my Web site.
cheerz


What are the contents and materials used in Russian tubes, i do not know!

Regards,

Nermin S58DX
----- Original Message ----- From: "R.Measures" <r@somis.org>
To: "Helmut (DF7ZS)" <hm@df7zs.de>
Cc: <amps@contesting.com>
Sent: Monday, January 10, 2005 10:38 AM
Subject: Re: [Amps] Aplha 91b


On Jan 10, 2005, at 1:25 AM, Helmut (DF7ZS) wrote:
Hi there.

I had some problems with my Alpha 91b yesterday.
Maybe somone can have a good guess based on the symtoms I had:

10m band. Tuning with 10w resulted in about 800w out - as usual.

30-60w input resulted in solid 1k out - I remember it was more before
???
Your 8874s may have gold contamination on the cathodes. The gold comes from the grid-plating and gold poisons emission, so P-out drops. However, the problem can usually be corrected. Do you have access to a high-pot tester?

I tried to make the fine tuning with 70w carrier - did that before - but
the amp imidiatly went on "FAULT" !


The SWR was perfect on 10m - same results on 15m as well.

On 20m it produced some more output, but also here I was not abel to get
the red 1.5k LED to lit - as it usually does on all bands. :-( Also 75w
carrier results imidiatly in "FAULT" ....


I did not have a dummy load for high power available for any further
testing.

The IP did not WENT over 1A before the fault came.

Could it be that one tube is down ?

73sss

Helmut

www.df7zs.de
www.skydive-video.de


_______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps


Richard L. Measures, AG6K, 805.386.3734.  www.somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps





Richard L. Measures, AG6K, 805.386.3734. www.somis.org


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>