Amps
[Top] [All Lists]

Re: [Amps] Cooling (GS35B)

To: Robert Thain <g0hgw@yahoo.com>
Subject: Re: [Amps] Cooling (GS35B)
From: Tony King - W4ZT <amps@w4zt.com>
Date: Tue, 15 Feb 2005 21:07:27 -0500
List-post: <mailto:amps@contesting.com>
Robert,

I've also noticed that blowing air from the end will not provide enough
air to the tube on the opposite end. It's the old "hole in the hose"
problem. The air is best blown in at the mid point between the tubes
either from the bottom or the long side.

73, Tony W4ZT

Robert Thain wrote:
Thank you to everybody who replied.

We were working on the amp over the weekend and found
that the blower 'should' have been capable of
producing the flow but wasn't. So we borrowed a MUCH
bigger blower and found that we had exactly the same
flow rate !!!!
We found that in the anode compartment, in one half we
had air flowing and one the other NOTHING at all , no
matter how big the blower was. We were blowing from
the side. We did a simple test and blew straight in
from the base and this made a big difference.
We are pretty sure that the initial problem is due to
turbulence and we will work on some baffles or duct
the air. Has anybody already had this problem, Been there done
that .....
Thanks again
Robert







___________________________________________________________ ALL-NEW Yahoo! Messenger - all new features - even more fun! http://uk.messenger.yahoo.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps




_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>