Amps
[Top] [All Lists]

Re: [Amps] Cheap network analyser on eBay

To: amps@contesting.com
Subject: Re: [Amps] Cheap network analyser on eBay
From: Ian White GM3SEK <g3sek@ifwtech.co.uk>
Reply-to: Ian White GM3SEK <g3sek@ifwtech.co.uk>
Date: Sat, 25 Jun 2005 21:04:39 +0100
List-post: <mailto:amps@contesting.com>
David Kirkby wrote:
>
>The N2PK VNA
>http://users.adelphia.net/~n2pk/VNA/VNAarch.html might well be better, 
>but I gather is not simple to build.
>
Just to be clear: the only thing that's "not simple" about the N2PK 
board is that it uses surface-mount components. That may be new to some 
people, but it really isn't hard.

The payback is that there's no setup needed at all.  If you build the 
N2PK board carefully, it's plug-and-play.

Just don't expect to do it with the same sodderin' arn that you use for 
PL259s!


-- 
73 from Ian GM3SEK         'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.co.uk/g3sek
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>