Amps
[Top] [All Lists]

Re: [Amps] Power cord to use when converting AL-80B to 240 volts?

To: <amps@contesting.com>
Subject: Re: [Amps] Power cord to use when converting AL-80B to 240 volts?
From: "John Vickers" <wa4tt@nlamerica.com>
Reply-to: John Vickers <wa4tt@nlamerica.com>
Date: Sun, 2 Oct 2005 20:19:02 -0400
List-post: <mailto:amps@contesting.com>
----- Original Message ----- 
From: "Will Matney" <craxd1@verizon.net>
>
> Well no! About every amp now is made for AM/SSB use unless.............

Will, Didn't make myself clear. I wasn't refering to linear use on AM, some 
fellows down in N. Fla are producing class C finals and modulators for the 
cb crowd. Custom made for their driver of choice.

I still have several AM rigs here, but seldom use them anymore. My favorite 
is a single 450TH with 810 modulators. The 450TH's would be a good subject 
for the gassy tube thread ! Out of 4, only one left that isn't bad gassy. 
(they're over 60 yrs old)
73 WA4TT 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>