I have the impression that will be used
for a ht-meter circuit, that can´t be done with a normal
resistor, a 5kv type will be required, the 5x1M Ohm might do it
if they are spezified to handle 500V each
73
Peter
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Dr. David Kirkby
Sent: Dienstag, 10. Januar 2006 21:54
To: Ron Spencer; amps@contesting.com
Subject: Re: [Amps] Meter Res.
Ron Spencer wrote:
> Does anyone know where I can buy one or have a 5 Meg Resister I need one
to go in a meter Circuit. I have 5 - 1 Meg but I don't what to make a PCP to
put them on.
>
> Ron Spencer
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
Two possible solutions
1) Resistors in the E96 range are farily easy to come by (RS in the UK
is one example). There you can get 4.99 M Ohm as a standard value.
See
http://industrial.panasonic.com/www-data/pdf/AOA0000/AOA0000PE1.pdf
for a list of resistors in the E96 range.
2) Two 10 M Ohm resistors in parallel.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|