Amps
[Top] [All Lists]

Re: [Amps] Building or Buying a Tuned Input Network

To: Tony King - W4ZT <amps080605@w4zt.com>, amps@contesting.com
Subject: Re: [Amps] Building or Buying a Tuned Input Network
From: Bill Turner <dezrat1242@ispwest.com>
Date: Sun, 22 Jan 2006 21:38:10 -0800
List-post: <mailto:amps@contesting.com>
ORIGINAL MESSAGE:

At 09:14 PM 1/22/2006, Tony King - W4ZT wrote:

>I hand made a board of my own (had my own nice 5 amp contact DPDT 
>relays, Arco trimmers and cores and did essentially the same thing 
>but I did leave larger pads to allow for the trimmers 
><http://gs35b.com/input/index.html>.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Boy are you thorough! Nice work.

Changing the topic slightly, how much drive does a GS-35b need for 
1500 watts output? It's probably on the web somewhere but I've looked 
and can't find it. The comparison chart between it and the 8877 shows 
a ~2dB difference in gain but no actual drive numbers. I could figure 
it in reverse but I'd like to hear from someone with actual experience.

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>