Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] What blower?

from [Mike Bondarev] [Permanent Link][Original]
To: Amps@contesting.com
Subject: Re: [Amps] What blower?
From: Mike Bondarev <mikebond@tochka.ru>
Reply-to: Mike Bondarev <mikebond@tochka.ru>
Date: Sat, 28 Jan 2006 11:32:18 +0000
List-post: <mailto:amps@contesting.com> 
Hi again!
Thanks to all of you for your comments. GU-84B need 147CFM and GU-78B
need 165CFM airflow. But this is for full power plate dissipation
continuous key down. In SSB and CW you can have less.  So I'll look
for Dayton 2C647, 4C006 and 4C446. I hope the quality of this blowers
is good for long time operations.

Regards, Mike RL3BM
ex. UA6LU


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] What blower?, Gary Smith
Next by Date:  [Amps] 3-500 / 4-400 cooling (09/10/2005), John E. Cleeve
Previous by Thread:  Re: [Amps] What blower?, Gary Smith
Next by Thread:  Re: [Amps] What blower?, N7HIY
Indexes:  [Date] [Thread] [Top] [All Lists]