Hi Mike,
put in a blower that exceeds the tube's requirement by at least 10% and then
speed control down for needed cooling at duty cycle in use, far more
adaptive, can be used for contest digital modes and has higher resale
value...can even put in thermostat controlled speed control for even less
operating noise
Cliff N7HIY
----- Original Message -----
From: "Mike Bondarev" <mikebond@tochka.ru>
To: <Amps@contesting.com>
Sent: Saturday, January 28, 2006 3:32 AM
Subject: Re: [Amps] What blower?
> Hi again!
> Thanks to all of you for your comments. GU-84B need 147CFM and GU-78B
> need 165CFM airflow. But this is for full power plate dissipation
> continuous key down. In SSB and CW you can have less. So I'll look
> for Dayton 2C647, 4C006 and 4C446. I hope the quality of this blowers
> is good for long time operations.
>
> Regards, Mike RL3BM
> ex. UA6LU
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|