Amps
[Top] [All Lists]

[Amps] FW: RF choke for 160m amp mod

To: amps@contesting.com
Subject: [Amps] FW: RF choke for 160m amp mod
From: rfdude@comcast.net
Date: Mon, 30 Jan 2006 18:41:18 +0000
List-post: <mailto:amps@contesting.com>
I figured it out! 
After looking at the problem and using admittances it became obvious why it 
works. The rf choke and bypass cap are part of the plate susceptance and the pi 
network with the higher L, C values, help matching down to 50 ohms (at 160m). 
This is a good example where admittances help you see the problem better than 
using impedances. I should have thought of it sooner.
chris kb3bf

-------------- Forwarded Message: -------------- 
From: rfdude@comcast.net 
To: amps@contesting.com 
Subject: [Amps] RF choke for 160m amp mod 
Date: Mon, 30 Jan 2006 15:40:44 +0000 

Hi, 
I added another 90microH mounted orthogonally to the existing (also 90microH) 
when modifying my 30S-1 for 160m. 

The unmofidied amp calls for 1.5nF 6KV bypass after the (original) RF choke. 
I mounted 5nF 10KV after the second choke and I was going to switch the 1.5nF 
(now between the chokes) in and out of the circuit when going from the regular 
bands to 160m. 
Well it turns out I don't need to, and with it in place I still get about 10% 
extra output on 160m, so that's one less thing I need to worry about. I have 
the 
amp on the air for many hours with no signs of heating or fireworks. 
Why am I even bothering with the second choke? However the numbers say I show 
use it. 

If the PA output has a (magnitude) Z of about 5-6K, and the choke and bypass 
reactances are about j1000 and -j100 at 2MHz respectively, why shouldn't I 
observe a lower efficiency output on 160m, instead I get more! What gives? 

thanks for any inputs on this surprising output (pun intended)..... 
73s 
kb3bf chris 
_______________________________________________ 
Amps mailing list 
Amps@contesting.com 
http://lists.contesting.com/mailman/listinfo/amps 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>