Does the step-start circuit have two power resistors and a DP relay?
On May 28, 2006, at 11:11 PM, Jeff Strailey wrote:
> My problem with operating an LK500 following the change to 120 Vac
> operation appears to be related to a step start mod that was added
> at some time to the amplifier. Perhaps someone has a schematic or
> other information regarding a step start mod kit that was sold at
> some time for the LK500. It is tempting to simply remove it and
> restore the AC input side of the amplifier to it's original state
> but step start is desirable if it can be made to work.
>
> Jeff K6TLA
>
>
> ---------------------------------
> New Yahoo! Messenger with Voice. Call regular phones from your PC
> and save big.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
R L MEASURES, AG6K. 805-386-3734
r@somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|