From: Jeff Strailey <liveccam@yahoo.com>
> My problem with operating an LK500 following the change to 120 Vac operation
> appears to be related to a step start mod that was added at some time
Jeff, It's time to learn the fine art of reverse engineering. Make sure the HV
caps are discharged and the unit is unplugged. Then get out your ohmmeter and
start tracing the wiring, so you can draw a schematic. That way you know what's
in there, and aren't guessing based on what may be in there.
73,
Jim, KR1S
http://kr1s.kearman.com/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|