On Jun 3, 2006, at 10:57 AM, W7RY wrote:
> -----Original Message-----
> From: Gudguyham@aol.com [mailto:Gudguyham@aol.com]
> Sent: Saturday, June 03, 2006 10:55 AM
> To: email@example.com
> Cc: firstname.lastname@example.org
> Subject: Re: [Amps] R. MEASURES PRAYERS ANSWERED
> In a message dated 6/3/2006 1:49:18 PM Eastern Daylight Time,
> email@example.com writes:
> The main issue with SB-220 band switches is because of the front panel
> layout, the band switch gets turned instead of the loading control
> in tune-up mode.
> YES THIS COULD BE A PROBLEM, BUT THAT DOES NOT ACCOUNT FOR THE 10
> AND 15 METER CONTACTS BEING BLOWN AWAY.
> Illogical statement.
If the 10m contact gets damaged most often, the 15m contact is the
2nd most frequently damaged, and the 40m contact does not get
damaged. perhaps the energy is VHF?
> The very late SB-220s and HL-2200s had longer tune caps. Or Heathkit
> made them available on a replacement basis. I have seen several
> with them.
> OF THE DOZENS I HAVE SEEN INCLUDING HL-2200'S THIS WAS NOT THE CASE
> ALTHOUGH I NEVER TOOK MEASUREMENTS MY FEELING IS THEY WERE ALL THE
> I don't "feel" the same way.
> 73 LOU
> Jim W7RY
> Amps mailing list
R L MEASURES, AG6K. 805-386-3734
Amps mailing list