Amps
[Top] [All Lists]

Re: [Amps] Safety grounding - was Mains Isolation Transformer

To: Gudguyham@aol.com
Subject: Re: [Amps] Safety grounding - was Mains Isolation Transformer
From: R L Measures <r@somis.org>
Date: Tue, 4 Jul 2006 07:40:18 -0700
List-post: <mailto:amps@contesting.com>
On Jul 4, 2006, at 6:01 AM, Gudguyham@aol.com wrote:

> In a message dated 7/4/2006 8:51:11 A.M. Eastern Standard Time,  
> r@somis.org writes:
>
> Correct.  The 240v outlet on my Honda generator has 4 conductors, and
> two of them carry zero current.  How does this make it safe?
> This is not entirely true at all.  Assuming you plug something into  
> your Honda generator that "matches up" to the plug configuration on  
> that generator, you are plugging in a device that requires some  
> sort of 120v power.

> In this instance the 3rd wire (white,neutral) will INDEED carry  
> current.
> IF..that device did not require 120 volts then the plug  
> configuration would not fit your Honda plug.

What kind of plug would it have?

> The 4th wire of course is a bond which does not carry current  
> unless a fault occurs.  Lou

R L MEASURES, AG6K. 805-386-3734
r@somis.org



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>