DEHAYS Dominique wrote:
> Hi everyone on here ,
>
> Question : what is the maximum temperature a GS35 tube anode copper
> cooler can go in operation ?
> I just want to know if it is possible to solder a brass piece on it using
> classical solder flux( 60 tin/40% pb) , or maybe the new one without pb
> (220°) , or is it mandatory to do brazing here?
The data sheet at http://frank.pocnet.net/sheets/018/g/GS35B.pdf says
200C maximum temperature for the anode. For best lifetime use enough air
to keep the anode well below the temperature where solder will melt.
Soldering to the anode cooler is easier if you remove the cooler and
pre-heat it in the oven.
steve
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|