Bill,
I only had about 7 volts difference between the two transformers. I assumed
they were close enough in voltage to be safely paralleled. I've only loaded
the PS to about 5000 watts. Might see fireworks at 8KW ( which would be
close to 5KW RF out ). Someone told me that Henry found it better to run
separate bridges ( one for each transformer ). Don't know where he got this
info.
Larry N5BIP
>NO! The transformers are wired directly in parallel on both primary and
>secondary.
>They must be exactly matched! I figured that I could remove one since I
>would not
>need that much continuous power for ham operations (beam traps would not
>take it either), and have
>an extra for another project.
>
>73
>Bill wa4lav
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|