Amps
[Top] [All Lists]

Re: [Amps] Parasitics & Filament Sag

To: R L Measures <r@somis.org>, g3rzp@g3rzp.wanadoo.co.uk
Subject: Re: [Amps] Parasitics & Filament Sag
From: Peter Chadwick <g3rzp@g3rzp.wanadoo.co.uk>
Reply-to: g3rzp@g3rzp.wanadoo.co.uk
Date: Sun, 3 Sep 2006 15:39:02 +0200 (CEST)
List-post: <mailto:amps@contesting.com>
Rich said:
> If an L-network was resonant on the operating frequency,  infinite  
current would flow through it because the reactive components are  
equal, opposite, in series, and not in parallel.<
Only because of your non-rigorous definition of resonance. AC theory tells us 
that the only definition of resonance that holds for all cases is that the 
applied voltage and current are in phase. The 'XL=XC' definition is a very 
loose approximation, and falls over badly when Q is low. There are occasions 
where it doesn't matter, but for an understanding of what is happening, it is 
necessary to appreciate the inherent errors in the approximation. The 
difference can be very important where feedback is applied, because a tuning 
error can lead to instability.
Ian says that in practice, it doesn't matter. Not to the  appliance operator, I 
suppose.
73
Peter G3RZP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>