David G4FTC wrote:
>
>
>> From: "Kinney John-r17512" <J.Kinney@freescale.com>
>> To: <amps@contesting.com>
>> Subject: [Amps] Mega Amplifier?
>> Date: Fri, 3 Nov 2006 15:55:52 -0700
>>
>> Now this is what I would call an "RF DECK" .
>>
>> This is the number 160047650891 on, you know where.
>>
>
>
> I'm wondering if this is a wideband amp (instanteous wideband as opposed to
> wide tuning range) with the tubes connected to what is effectively a delay
> line. The photo of the anode compartment seems to show the inductors
> connected in a daisy chain fashon from anode to anode. The grids would be
> coupled in a similar manner.
That's right - it's a distributed line amp.
>
> I know Marconi (the company) made such a wideband amp with a number of
> 4CX250B's but the power was only rated a 1kW out.
Depending on the application, it's normal to run the valves in class A
at 50-100W max. each.
Steve
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|