I used the .5 X 4 rods material type 33 with #10 enamel wire wound to the
ends in a 3cx3000a7 amp and it works on 3.75 MHz just fine. It sits in from
of a fan in the lower deck compartment. At 51.5 amps I figured it needed
some cooling. Been running for years. I bought it from Amidon at
http://www.amidoncorp.com/aai_ferriterods.htm . They are probably pretty
pricey these days.
Regards,
Larry N5BIP
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Ed Stallman
Sent: Tuesday, January 02, 2007 8:29 AM
To: amps@contesting.com
Subject: [Amps] Ferrite Rod
Who has or sells Ferrite Rod? I'm looking for 3/8 OD , not sure how long
to wind a Filament choke!
Thanks Ed N5BLZ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|