Of course you must realize that these cabinets are little more than fancy
Even Heath acknowledged this, with the incorporation of a separate "...inner
enclosure" to shield & house the 2x572B "works".
All of the lid top units used in the "SB" series of transceivers / receivers
/ transmitters were alike, i.e. you can readily use one from an SB-400 / 401
/ 300 / 301 / 100 / 101 / 102 / etc.
They're notorious for poor paint adhesion --- be forewarned!
~73~ Eddy VE3CUI - VE3XZ
----- Original Message -----
From: "Bryan Swadener" <firstname.lastname@example.org>
Sent: Tuesday, August 28, 2007 1:52 PM
Subject: Re: [Amps] SB cabinets
> > Date: Mon, 27 Aug 2007 17:27:30 -0400
> > From: "c.s." <email@example.com>
> > Subject: [Amps] sb cabinets
> > It appears that, from all my answers to the
> > SBxxx cabinet
> > questions, that the "only" SB units were the SB-303
> > and the SB310 to
> > use the "solid" cabinets.!!!! All the rest seem to
> > hasve used the
> > "hinged top" cabinets. If I am correct please let me
> > know, and if I'm
> > wrong also please let me know also.!!!
> > I'd still like to get the right cabinet
> > for my SB200.!!!!
> > thanks !!!!!
> > firstname.lastname@example.org
> > aka carl/kz5ca
> My retired SB102 cabinet has a hinged top. IIRC, it
> has the same height as the SB200... dunno if rest of
> the dimensions are the same, and if the cutouts on the
> rear panel would be the same as on an SB200. No...
> you may not have my '102's cabinet! :-P
> > Date: Mon, 27 Aug 2007 18:53:29 EDT
> > From: Gudguyham@aol.com
> > Subject: Re: [Amps] sb 200 cabinet
> > Does anybody have a spare SB-200 cabinet kicking
> > around they want to sell
> > Carl, or know where one can be bought?
> You could try classifieds on eham & qrz. There's also
> that (hated and loved) e-auction site. You're after
> only sheetmetal... and probably couldn't care less
> about how it works.
> Bryan WA7PRC
> Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user
panel and lay it on us.
> Amps mailing list
Amps mailing list