----- Original Message -----
From: "Tom Rauch" <w8ji@contesting.com>
To: <amps@contesting.com>
Sent: Tuesday, September 25, 2007 8:37 PM
Subject: Re: [Amps] IMD
>> >If you look at the AL-1200 specs they claim 1200W with 3
>> >tubes so no matter how anyone wants to spin it Im not
>> >doing anything different at 750W with two.<
>> ::The AL-1200 uses a single 3CX1200A7 and runs 1500W
>> output using a tube having 1200W anode dissipation. You
>> must have a very different AL-1200.
>>> 73, Steve WB2WIK/6
>
>> Sorry, I meant the AL-572 which you could just as easily
>> have found by going a bit further on their web site.
>> Carl
>
> You must have a very special AL752.
>
> The normal AL-572 has four tubes.
>
> 73 Tom
You are correct, my mistake.
Carl
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|