Amps
[Top] [All Lists]

Re: [Amps] CB Amps or full spectrum???

To: "Tom Rauch" <w8ji@contesting.com>, <amps@contesting.com>
Subject: Re: [Amps] CB Amps or full spectrum???
From: "jeremy-ca" <km1h@jeremy.mv.com>
Date: Wed, 10 Oct 2007 14:28:53 -0400
List-post: <mailto:amps@contesting.com>
I find it strange that you condemn a circuit without even knowing its 
details.

Carl
KM1H


----- Original Message ----- 
From: "Tom Rauch" <w8ji@contesting.com>
To: <amps@contesting.com>
Sent: Wednesday, October 10, 2007 2:03 PM
Subject: Re: [Amps] CB Amps or full spectrum???


>> BTW, a 1N5408 on top of an output transistor makes a fair
>> temperature
>> regulator. Not perfect but its cheap and simple as a
>> retrofit of an existing
>> brick.
>
> Measure the voltage regulation of that method when you drive
> the amp with rated drive power and most people's opinion
> will change. It's a crummy system at more than a few watts.
>
> As the base is driven with RF it tries to move negative. In
> order for the bias to remain anywhere near to stable the
> current through the diode has to be at least ten times the
> peak base current. You'll fry that little 1N5408 trying to
> get that much current in any amp that runs more than a few
> mA of base current.
>
> 73 Tom
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>