Ken, I accomplished the same thing using a triac light dimmer wih a rotary
knob. Works great. I think your calcs do not take into account that the
filament R varies as the voltage changes.
73, Dan, N5AR
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
Behalf Of k1um@bellsouth.net
Sent: Thursday, April 24, 2008 8:13 AM
To: Amps@contesting.com
Subject: [Amps] 4-1000 HB amp
I have been lurking for a while here... I need a 2nd amp for SO2R
Contesting - my current amp is the Ameritron AL1200 -
I have been salting away 4-1000 parts over the last 40 years and decided to
HB amp#2
The power supply is a remote unit with ambilical to desk top amp deck. Has
variac input 220v, P dahl xfmr and home grown chasis/box on wheels
My questrion is since the 4-1000 uses 7.5 fil at 21 amps - I want to switch
resistors to the fil to yield 1/4, 1/2, 3/4 voltage and finally full fil
voltage....
my calc's=
P=IE=7.5*21=157W FIL SIDE
I=157/120=1.4 AMP PRIMARY SIDE [ROUNDING UP]
SO for
3/4V=30V/1.4I =23 OHMS
1/2V = 46 OHMS
1/4V =69 OHMS
IS my calculations about right???
KEN K1UM
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|