Thank you to all who have replied, both on and off list. Looks like I will
not be using a 3-1000H as a standby. Thank you again.
73,
Mike
W5CUL
-----Original Message-----
From: Bill Fuqua [mailto:wlfuqu00@uky.edu]
Sent: Thursday, June 19, 2008 10:36 AM
To: W5CUL; amps@contesting.com
Subject: Re: [Amps] Amperex 3-1000H
The H is a low mu tube and not suitable for class be grounded grid.
If you put it into an amplifier in place of a 3-1000Z it will draw loads of
current
and get red hot.
73
BIll wa4lav
At 01:56 AM 6/19/2008 -0400, W5CUL wrote:
>Has anyone heard of an Amperex 3-1000H being used in a Class B Grounded
Grid
>Linear RF Amplifier application? The Amperex data sheet only lists it as a
>Class C RF Industrial Oscillator. And all Google searches turn up nothing
>other than it being used as an industrial heater. Most of its electrical
>specifications and maximum ratings seem to fall closely inline with that of
>the Amperex 3-1000Z. The exceptions being that it does have a lower Mu (24
>as opposed to 200), and lower plate dissipation (850W as opposed to 1000W).
>
>
>
>
>Thank you in advance.
>
>
>
>Mike
>
>W5CUL
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|