Amps
[Top] [All Lists]

[Amps] Arcing in C1 and C2

To: "amps" <amps@contesting.com>
Subject: [Amps] Arcing in C1 and C2
From: "Robert Kirkland" <alpha76@triton.net>
Date: Mon, 21 Jul 2008 09:55:58 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Roughly, under load, the rf voltage at c1 should be plate voltage times .9 
if this arcs the cap plate spacing is too small or the cap is damaged. If c2 
arcs the amp is not loaded properly, ck the antenna circuits. This, usually 
is correct for legal power, no experience with  contest amps.
Bob,w5pvr

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>