| To: | "amps@contesting.com" <amps@contesting.com> |
|---|---|
| Subject: | Re: [Amps] coax length between transceiver and amplifier |
| From: | "Jim Brown" <jim@audiosystemsgroup.com> |
| Date: | Mon, 03 Nov 2008 08:04:52 -0800 |
| List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
On Sun, 2 Nov 2008 20:51:46 -0500, Carl wrote: >As long as there is sufficient drive available even a modest loss in the >coax wont hurt. Except on receive, if the preamp is at the RX. If the preamp is between the antenna and the power amp, I agree that loss between the transmitter and the power amp doesn't matter. Shielding should not be an issue for any reasonable coax unless your shack is AWFULLY noisy. 73, Jim K9YC _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] RG-223U, Felipe Ceglia |
|---|---|
| Next by Date: | [Amps] Desk top racks, Bob Gibson |
| Previous by Thread: | Re: [Amps] coax length between transceiver and amplifier, Carl |
| Next by Thread: | Re: [Amps] coax length between transceiver and amplifier, Carl |
| Indexes: | [Date] [Thread] [Top] [All Lists] |