Lou,W1QJ converts Heath amps for 6 meters,does a nice job and he`s a good
guy too...I have seen his work and I wouldn`t be a bit surprised if he would
offer some free advice...Or: Get him to do the conversion for
you...Jim..K7RDX...
----- Original Message -----
From: "Carl" <km1h@jeremy.mv.com>
To: "Craig Anderson Ext 1365" <Craig.Anderson@saintpaul.edu>;
<amps@contesting.com>
Sent: Wednesday, November 05, 2008 11:04 AM
Subject: Re: [Amps] SB-200 on Six Meters
> Ive yet to see any magazine conversion worth a damn. Unstable, poor
> efficiency, no clue how to design at VHF, etc.
>
> That is why I developed my own procedure and have been converting them
> for customers for decades.
>
> Carl
> KM1H
> ----- Original Message -----
> From: "Craig Anderson Ext 1365" <Craig.Anderson@saintpaul.edu>
> To: <amps@contesting.com>
> Sent: Wednesday, November 05, 2008 12:16 PM
> Subject: [Amps] SB-200 on Six Meters
>
>
>>I have an SB-200 that I would like to convert to 6M using a dedicated
>> tank circuit not one of those conversions that simply change a few
>> values on 10M meter position. I have the article from the Nov 1971
>> issue of Ham Radio magazine describing a dedicated conversion for the
>> SB-200 using an all new 6M tank circuit. Has anyone done this
>> conversion?
>>
>> Craig W9CLA
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.175 / Virus Database: 270.8.6/1769 - Release Date: 11/5/2008
7:17 AM
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|