Re: [Amps] HV wire

To:	walnutcreek@appstate.net
Subject:	Re: [Amps] HV wire
From:	"Mike McCarthy, W1NR" <lists@w1nr.net>
Date:	Tue, 23 Dec 2008 08:29:44 -0500
List-post:	<amps@contesting.com">mailto:amps@contesting.com>

walnutcreek@appstate.net wrote:
> HI all,
> I am in need of a section of High voltage wire for a 3500 volt power supply 
> I'm rebuilding with new caps and so on.  I need 20" to finish it up.
> Thanks, 
> Cam
> WA4JKW
>
>
>   
I have always used 10,000 volt test prod wire like Belden 8898 available
from Allied in 25' spools. The 5000 volt 8899 I use internally.

Mike, W1NR

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] HV wire, walnutcreek@appstate.net Re: [Amps] HV wire, Glen Zook Re: [Amps] HV wire, Jim Tonne Re: [Amps] HV wire, David G4FTC Re: [Amps] HV wire, Pat Barthelow Re: [Amps] HV wire, Carl Re: [Amps] HV wire, Robert Morris Re: [Amps] [Bulk] Re: HV wire, Dave Harmon Re: [Amps] HV wire, chas Re: [Amps] HV wire, Mike McCarthy, W1NR <= [Amps] HV Interlocks on remote PS, Roger Re: [Amps] HV wire, Missouri Guy Re: [Amps] HV wire, Roy Re: [Amps] HV wire, W4AWM [Amps] HV Wire, Robinson, Robert L

Previous by Date:	Re: [Amps] 3CPX800A7, Gary Smith
Next by Date:	Re: [Amps] High voltage wire, Jan Erik Holm
Previous by Thread:	Re: [Amps] HV wire, chas
Next by Thread:	[Amps] HV Interlocks on remote PS, Roger
Indexes:	[Date] [Thread] [Top] [All Lists]