Amps
[Top] [All Lists]

Re: [Amps] Step Start Relay

To: "'Adrian Rees \(MW1LCR\)'" <rees.a@btconnect.com>, <amps@contesting.com>
Subject: Re: [Amps] Step Start Relay
From: "Evert Bakker \(PA2KW\)" <evert@pa2kw.com>
Reply-to: evert@pa2kw.com
Date: Fri, 13 Feb 2009 15:47:29 +0100
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Adrian,

Just use a NTC and you can just put it in the same cabinet.

73's, Evert PA2KW

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Adrian Rees (MW1LCR)
Sent: Friday, February 13, 2009 15:07
To: amps@contesting.com
Subject: [Amps] Step Start Relay

Hi all

I am near completion of the re-build of the power supply of my Dentron
ML2500 linear, and all is well. I now wish to add a Step Start facility.
However, there is limited space within the case of the linear so an
external step start would be in order. (I also have a TL922 as well as a
home brew 144MHz Linear, all of which would benefit from a step start
facility).

I was wondering what duration of delay to use with the step start. I
think about 250mS - 500mS would be about right. What are the groups
thoughts on this ?

I have a delay relay that will do the job, as its contacts are rated at
500v at 16A (AC), although the shortest delay on this relay is 1 second.


Thoughts anyone ?

Thanks

Adrian MW1LCR 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>