Good morning, here is a 'golden Opportunity'
Background
Several years ago I purchased a used Drake L4-b Amp with
Power supply. It also came with a homebrew 'super power
supply'
The super supply was supposed to provide enough power to run
The pair of Eimac 3-500Z 'to full power' what ever that
means.
Suffice it to say that I was never able to successfully run
the
Supper power supply. Recently I became interested in getting
the
Amp. To work and replaced a plug from the power supply to the
Amp.
And also learned how to correctly connect the transmit relay
line.
Today the Amp. Puts out 650 watts with abt 70 watts drive on
RTTY
with the factory power supply. I am happy.
No longer am I interested in the 'super power supply' project.
Therefore I have for sale.
Peter W Dahl Hypersil Transformer
Model SB220X-2
Primary 117/130 V. AC 60 HZ
Sec. 925/1175 VAC @ 3.5 A. CCS
It has Hi/Lo input voltage taps that are very useful for
'tune-RTTY'/SSB operation
I am asking $450.00 for the transformer.
Weight - on my home scale is 66 lbs. When I pack it into a
wood box with padding it will be right at the maximum of 75 lbs
that the post office will accept. Buyer pays shipping. I
will pay and do packing.
The 'super power supply' came with two capacitors.
General Electric Pyranol Capacators.
No. V 103695
Cat. 18f268
Volts 3,000 DC max
Muf 120
Contains 1.25 Gal Non flammable Liquid
Each Cap. Weighs 52.5 lbs on my home scale.
I am asking $25.00 for each capacitor.
I do not have a web site. I can email you pictures.
If someone buys both the transformer and the Caps. I will throw in
(because of my generous nature and I will have no use for) the high
wattage Resistors and some delay start relays. Also there are hand
written (scribbled) Copies of the power supply schematic. I do not
see anything special in the schematic. 25 watt resistor in line with
the primary that is shunted by a delay start relay. CW/Tune position
and SSB position is handled by the Hi/Lo taps on the primary.
The output was a doublers circuit - caps in series with each other and
parallel to resistors in series.
I do not know about overseas shipping. I have never shipped anything
out of the country. I'm sure it is expensive but I don't know about
export and import rules.
Mayo Fl is halfway between Jacksonville and Tallahassee and about 30
min. south of I10.
KV4FE
James Bloomfield
Mayo Florida
KV4FE@ARRL.net
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|