I have a similar problem. The meter in my sb-200 works on all positions except
for the relative power output position and the swr position. Any suggestions?
Ray wa7itz
> From: km1h@jeremy.mv.com
> To: mrpenguin@xnet.co.nz; amps@contesting.com
> Date: Sun, 19 Jul 2009 10:37:32 -0400
> Subject: Re: [Amps] sb201 / sb200 internal swr bridge diodes ?
>
> A matched pair of germanium 1N191's. The more popular 1N270 should work.
>
> Carl
> KM1H
>
>
> ----- Original Message -----
> From: "ian" <mrpenguin@xnet.co.nz>
> To: <amps@contesting.com>
> Sent: Sunday, July 19, 2009 12:26 AM
> Subject: [Amps] sb201 / sb200 internal swr bridge diodes ?
>
>
> >
> > Hi guys
> >
> > Any know what type of diodes are used in the internal swr bridge on the
> > SB200 / 201 ?
> >
> > The two clear / glass body diodes hanging off the rf pickup elements
> > have broken leads....
> >
> > Regards
> > Ian de ZL2IAS
> >
> >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|