ORIGINAL MESSAGE:
On Sun, 19 Jul 2009 16:26:29 +1200, ian <mrpenguin@xnet.co.nz> wrote:
>
>Any know what type of diodes are used in the internal swr bridge on the
>SB200 / 201 ?
>
>The two clear / glass body diodes hanging off the rf pickup elements
>have broken leads....
REPLY:
Almost always, SWR bridges use germanium diodes such as the 1N34 because they
have a lower turn-on voltage than silicon types. I don't own one of those amps
so don't take this as definitive, but if you don't get an answer from an owner,
it wouldn't hurt to try a 1N34.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|