Amps
[Top] [All Lists]

Re: [Amps] QSK-5 insertion loss...

To: <amps@contesting.com>
Subject: Re: [Amps] QSK-5 insertion loss...
From: "Paul Christensen" <w9ac@arrl.net>
Date: Fri, 12 Feb 2010 13:56:27 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
> My rough math indicates that 1500 watts out and 1 dB loss dissipates what,
> 300 watts in the QSK box?? Can't be? My QSK-1500 runs cold. Also, I don't
> see any significant loss on the power meter, but I haven't measured 
> closely.

More investigation is needed as I came to the same calculated power 
dissipation for 1.5 dB of loss at 10m.  I've validated my measurements on 
three separate devices into a Bird Terma-Line load but the QSK-5 does not 
appear to run unusually hot at 1KW from an SPE Expert amp.  I'll report back 
when I find the root cause.  Seems like this might be a good use for an 
industrial IR-detecting temperature scanner.

Paul, W9AC

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>