[Top] [All Lists]

Re: [Amps] How to read the 3-500Z spec sheet?

To: <>, <>, <>
Subject: Re: [Amps] How to read the 3-500Z spec sheet?
From: "Carl" <>
Date: Sun, 23 May 2010 12:34:10 -0400
List-post: <">>
Try sticking to the 3-500Z and the service in the discussion Lou.

You might also want to look at the 3-500Z Eimac specs at the Absolute 
Maximum Ip rating for Class B linear service.

And at some point put an AL-80 on an SA and look at the IMD when operated 
full bore. It aint pretty.



In a message dated 5/23/2010 11:16:53 A.M. Eastern Daylight Time, writes:
At 2700V @ 400 ma it doesnt matter if its CCS or not
Carl, how do you account for a pulse rating on a tube? For a 3cpx1500a7 tube 
the plate current is 50AMPS and the Anode V is 10KV and the output power is 
306KW!!  Is it not a Po vs time? 

Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>