I use Kings, SHV. You can see them in use in the pictures of my 8877
amplifier and power supply at:
On Sun, May 23, 2010 at 12:31 PM, Barrie Smith <firstname.lastname@example.org> wrote:
> Some time ago, there was a thread concerning HV connectors and HV wire.
> I did not pay too much attention at the time, because I had no needs,
> Things have changed, and I find myself building a small amp for 10 and 15M,
> only (My HB 10 through 160 has never worked on 10 or 15). The HV will only
> be 2 KV.
> I found the thread, but it appears to be one of those that went in all
> I think the post that caught my attention was one by (I think) Bill, W6WRT.
> He mentioned a connector that was similar to a BNC where the ground had to
> be made before the HV was connected.
> I'd like to know what they are and where to get them.
> 73, Barrie, W7ALW
> Barrie, W7ALW, DN36au,
> QRV 6M, 432 & 1296 EME
> Amps mailing list
Amps mailing list