Amps
[Top] [All Lists]

Re: [Amps] Tubes, made in the USA, in the olden days; Films?

To: "'Patrick Barthelow'" <apolloeme@live.com>, "km1h@jeremy.mv.com" <km1h@jeremy.mv.com>, Jim Tonne <tonne@comcast.net>, "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] Tubes, made in the USA, in the olden days; Films?
From: "Randall, Randy" <Randy.Randall@healthall.com>
Date: Mon, 30 Aug 2010 10:45:57 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Back in the day 10,000 would have been a small run of one type.  Non-amp 
related trivia, but I wonder what was the most manufactured tube number?  12 or 
6AU6, 12AX7, 5U4 etc?

Randy AB9GO

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On 
Behalf Of Patrick Barthelow
Sent: Monday, August 30, 2010 10:20 AM
To: km1h@jeremy.mv.com; Jim Tonne; amps@contesting.com
Subject: [Amps] Tubes, made in the USA, in the olden days; Films?

They must have done big batch manufacture... say a run of I don't  know 10,000  
12AX7 plates   10,000 grids, etc..
nfo/amps

Confidentiality Notice: This e-mail message, including any attachments, is for 
the sole use of the intended recipient(s) and may contain confidential and 
privileged information.  Any unauthorized review, use, disclosure or 
distribution is prohibited. If you are not the intended recipient, please 
contact the sender by reply e-mail and destroy all copies of the original 
message.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>